★以下是英文寫作翻譯頻道為大家整理的《機械排線器相關英語詞匯翻譯》，供大家參考。更多內容請看本站寫作翻譯頻道。
內部)軸承座中心之間的光軸長度?！ ength of shaft between the centres of the (inner) bearing blocks
V形減速凸輪 V-shaped slowdown cam
標準光軸： Standard shafts:
表面粗糙度： Surface roughness:
表面硬度： Surface hardness:
不停機回轉光軸上運行的驅動器。 Drive operating on the rotating shaft without standstill
不圓度： Out-of-roundness:
材料卷繞速度 speed of the material to be wound
材料偏移范圍 area of the material deflection
側向推力 Side thrust
程序控制 Sequence control
齒形刻度盤 serrated scale
傳動力矩 drive torque
從列線圖確定壽命(小時) Determine the life from the nomogram (in hours)
粗糙度 roughness height rating
彈簧換向機構 spring-operated reversing mechanism.
電刷 Wipers
防腐蝕 corrosion protection
防銹防酸光軸： Rust- and acid-proof shafts:
防銹光軸： Rust-proof shafts:
分離支架 separate carriage
改變旋轉方向 Changing direction of rotation
感應表面淬火surface-hardened by induction
感應淬火、研磨、拋光的鋼軸?！ ?Induction-hardened, ground and finished steel shafts.
隔音 Noise dampening
光軸、導軌、軸承座和換向擋塊 shaft, guide rails, bearing blocks and end stops
光軸材質 Shaft material
光軸速度 shaft speed
光軸下垂 shaft sag
光軸旋轉 Shaft rotation
光軸直徑 shaft diameter
滾動環動態能力 dynamic capacity of the rolling rings
滾動環徑向載荷 radial load on the rolling rings
滾環驅動器產生的側向推力 side thrust produced by the rolling ring drive
滾環驅動器在光軸自由移動用釋放手柄 Release lever for free displacement of the rolling ring drive on the shaft
換向點加速度 acceleration at the reversal point
換向減速 Reversal slowdown.
換向減速滾動環驅動器 Rolling ring drives with reversal slowdown (feature V)
換向減速凸輪長度。 Length of reversal slowdown cam
換向時間 reversal time
緊定螺釘 set screws
減速凸輪 slowdown cams
減速凸輪長度 Length of deceleration cam
節距設置 Pitch setting
鋸齒形50級刻度盤 Serrated 50-step scale
卷繞線材張力 tension in the material to be wound
卷繞應用 Winding applications
卷筒盤接觸來觸發換向的移動鍵 Shifting linkage that makes contact with the spool flange to activate the reversal.
空轉力矩 idling torque
控制手柄 control levers
連續調整節距用蝸輪驅動器 Worm gear drive for continuous adjustment of the pitch.
連續高速節距用堅定螺釘 Set screws for continuous adjustment of the pitch
聯軸節連接。 Coupling connection
臨界光軸速度 critical shaft speed
磨擦系數。 Coefficient of friction
排線路徑traversing path,
排線器行走方向張力 tension working against the direction of travel of the drive
排線速度的計算 Calculation of the traversing speed
配有光軸和軸承的滾環驅動器(ARG)?！ olling ring drive (ARG), complete with shaft and bearings
前端倒角 Leading end chamfer
切換機構 Switching mechanism
切換機構彈簧 springs in the snap-action switching mechanism
驅動電動機 Drive motor
驅動力矩 Drive torque
驅動器排線寬度 traversing width of the drive
全部研磨、精加工 All ground and superfinished
確定換向時間 To determine reversal time
繞線筒卷筒直徑 barrel diameter of the bobbin
繞線筒與光軸速度比 Optimum ratio between the bobbin and the shaft speeds
市場可購買到的不含MoS2滾柱軸承油脂 commercially available MoS2-free roller bearing greases
釋放手柄 release lever
雙動氣缸 double-acting pneumatic cylinder
雙軸承座 Double bearing support
瞬時換向、刻度盤、釋放手柄 MCR features
瞬時換向滾動環驅動器 Rolling ring drives with instantaneous reversal
所需側向推力 side thrust required
所需傳動功率 drive power required
所選排線器節距 maximum pitch of the drive selected
停機旋轉光軸上運行的驅動器?！ rive operating on the rotating shaft with standstill
通過排線器箱體側壁安裝的滾輪防止扭轉應變?！ otection against torsional strain by rollers mounted on the side wall of the housing.
同心度偏差 Concentricity tolerance
維護保養 Maintenance
無光軸和軸承的滾環驅動器 Rolling ring drive without shaft and bearings
無扭短聯接適配器 Adapter for torque-free coupling
無需最小排線寬度 No minimum traversing width required.
線材卷繞直徑或節距。 Maximum diameter of the material to be wound or maximum pitch
載荷與支架總重的法向力。 Normal force of the total weight of the payload and the carriage
支撐托架 Support bracket
直徑公差： Diametral tolerance:
重型導軌 Heavy-duty guide rail
軸承座切削力分力 component of the cutting force of a separator)
軸驅動 Shaft drive
專用清漆 Special varnish
自鎖鈕 Self-locking knob
節距 maximum pitch
最低要求： Minimum requirements:
最小換向距離： Minimum reversal distance:
內部)軸承座中心之間的光軸長度?！ ength of shaft between the centres of the (inner) bearing blocks
V形減速凸輪 V-shaped slowdown cam
標準光軸： Standard shafts:
表面粗糙度： Surface roughness:
表面硬度： Surface hardness:
不停機回轉光軸上運行的驅動器。 Drive operating on the rotating shaft without standstill
不圓度： Out-of-roundness:
材料卷繞速度 speed of the material to be wound
材料偏移范圍 area of the material deflection
側向推力 Side thrust
程序控制 Sequence control
齒形刻度盤 serrated scale
傳動力矩 drive torque
從列線圖確定壽命(小時) Determine the life from the nomogram (in hours)
粗糙度 roughness height rating
彈簧換向機構 spring-operated reversing mechanism.
電刷 Wipers
防腐蝕 corrosion protection
防銹防酸光軸： Rust- and acid-proof shafts:
防銹光軸： Rust-proof shafts:
分離支架 separate carriage
改變旋轉方向 Changing direction of rotation
感應表面淬火surface-hardened by induction
感應淬火、研磨、拋光的鋼軸?！ ?Induction-hardened, ground and finished steel shafts.
隔音 Noise dampening
光軸、導軌、軸承座和換向擋塊 shaft, guide rails, bearing blocks and end stops
光軸材質 Shaft material
光軸速度 shaft speed
光軸下垂 shaft sag
光軸旋轉 Shaft rotation
光軸直徑 shaft diameter
滾動環動態能力 dynamic capacity of the rolling rings
滾動環徑向載荷 radial load on the rolling rings
滾環驅動器產生的側向推力 side thrust produced by the rolling ring drive
滾環驅動器在光軸自由移動用釋放手柄 Release lever for free displacement of the rolling ring drive on the shaft
換向點加速度 acceleration at the reversal point
換向減速 Reversal slowdown.
換向減速滾動環驅動器 Rolling ring drives with reversal slowdown (feature V)
換向減速凸輪長度。 Length of reversal slowdown cam
換向時間 reversal time
緊定螺釘 set screws
減速凸輪 slowdown cams
減速凸輪長度 Length of deceleration cam
節距設置 Pitch setting
鋸齒形50級刻度盤 Serrated 50-step scale
卷繞線材張力 tension in the material to be wound
卷繞應用 Winding applications
卷筒盤接觸來觸發換向的移動鍵 Shifting linkage that makes contact with the spool flange to activate the reversal.
空轉力矩 idling torque
控制手柄 control levers
連續調整節距用蝸輪驅動器 Worm gear drive for continuous adjustment of the pitch.
連續高速節距用堅定螺釘 Set screws for continuous adjustment of the pitch
聯軸節連接。 Coupling connection
臨界光軸速度 critical shaft speed
磨擦系數。 Coefficient of friction
排線路徑traversing path,
排線器行走方向張力 tension working against the direction of travel of the drive
排線速度的計算 Calculation of the traversing speed
配有光軸和軸承的滾環驅動器(ARG)?！ olling ring drive (ARG), complete with shaft and bearings
前端倒角 Leading end chamfer
切換機構 Switching mechanism
切換機構彈簧 springs in the snap-action switching mechanism
驅動電動機 Drive motor
驅動力矩 Drive torque
驅動器排線寬度 traversing width of the drive
全部研磨、精加工 All ground and superfinished
確定換向時間 To determine reversal time
繞線筒卷筒直徑 barrel diameter of the bobbin
繞線筒與光軸速度比 Optimum ratio between the bobbin and the shaft speeds
市場可購買到的不含MoS2滾柱軸承油脂 commercially available MoS2-free roller bearing greases
釋放手柄 release lever
雙動氣缸 double-acting pneumatic cylinder
雙軸承座 Double bearing support
瞬時換向、刻度盤、釋放手柄 MCR features
瞬時換向滾動環驅動器 Rolling ring drives with instantaneous reversal
所需側向推力 side thrust required
所需傳動功率 drive power required
所選排線器節距 maximum pitch of the drive selected
停機旋轉光軸上運行的驅動器?！ rive operating on the rotating shaft with standstill
通過排線器箱體側壁安裝的滾輪防止扭轉應變?！ otection against torsional strain by rollers mounted on the side wall of the housing.
同心度偏差 Concentricity tolerance
維護保養 Maintenance
無光軸和軸承的滾環驅動器 Rolling ring drive without shaft and bearings
無扭短聯接適配器 Adapter for torque-free coupling
無需最小排線寬度 No minimum traversing width required.
線材卷繞直徑或節距。 Maximum diameter of the material to be wound or maximum pitch
載荷與支架總重的法向力。 Normal force of the total weight of the payload and the carriage
支撐托架 Support bracket
直徑公差： Diametral tolerance:
重型導軌 Heavy-duty guide rail
軸承座切削力分力 component of the cutting force of a separator)
軸驅動 Shaft drive
專用清漆 Special varnish
自鎖鈕 Self-locking knob
節距 maximum pitch
最低要求： Minimum requirements:
最小換向距離： Minimum reversal distance: