2011最新北京校園招聘信息：博世力士樂（北京）液壓有限公司校園招聘公告
簡歷投遞： career.brcb@boschrexroth.com.cn
職位性質： 全職/見習 招聘人數： 1 人
工作地點： 北京
Hardware and measurement engineer / 硬件和測試工程師職位描述：
- University degree, mainly in the mechanical area, electronics or measurement engineering 大學以上學歷，機械，電子或測試技術工程專業
- Familiar with measurement technique and mechatronic systems 熟悉測試技術知識和機，電，液系統
- Experience in testing of the mobile working machines 有一定的移動機械測試經驗
- English in words and writing 英語說，寫能力
- Responsible for hardware (ECU, sensors, transducers and measurement equipments) specification 負責硬件（控制器，傳感器和測試儀器等）的需求管理
- Responsible for the measurement and data processing software 負責測試和數據處理所需軟件的管理
- Based on the test specification, design and realization of the measurement system configuration and calibration根據實驗要求設計和實現測試系統的配置和標定
- Design and match of the ECU interface and carrying out of the ECU test 控制器接口的設計匹配和測試
- Involvement in the creation of the test specification and support vehicle tests 參與制定測試要求并支持車輛測試，熟悉CAN Bus組件
System development engineer /系統開發工程師詳情
簡歷投遞： career.brcb@boschrexroth.com.cn
職位性質： 全職/見習 招聘人數： 2 人
工作地點： 北京
System development engineer /系統開發工程師職位描述：
- University degree above, mainly in the mechanic or electronic engineering / 大學以上學歷，機械或電子工程專業
- Familiar with control system design / 熟悉控制系統的設計方法
- Good knowledge about mechatronics and hydraulic systems / 具備機， 電， 液系統知識
- Experience in modelling and simulation of the mobile working machines / 有從事行走機械系統建模和仿真的經驗
- English in words and writing / 英語說，寫能力
- Modeling and simulation of the transmission and working systems / 行走系統和工作系統的建模和仿真
- Identify and prioritize system hazards / 系統風險的分析和優先級確定
- Development of the control strategy and design of the controller parameters/ 控制系統的控制策略和控制器參數設計
- Model-based design and test of the machine functions / 基于模型的系統功能設計和測試，熟悉Matlab/Simulink，和AMESIM軟件
- Involvement in the vehicle tests and parameter optimization/ 參與車輛測試和參數優化
Function&software engineer / 功能與軟件設計工程師詳情
簡歷投遞： career.brcb@boschrexroth.com.cn
職位性質： 全職/見習 招聘人數： 1 人
工作地點： 北京
Function&software engineer / 功能與軟件設計工程師職位描述：
- Bachelor’s degree or above, in mechanic, electronic or technical engineering
大學以上學歷，機械，電子，軟件工程專業
- Familiar with software engineering
熟悉工程軟件開發
- Knowledge in mechatronic systems
具備機，電，液系統知識
- Experience in programming with c, c++
有c, c++ 編程經驗
- Good English speaking and writing skills
英語說，寫能力
- Development of the software architecture and specification for mobile working and transmission system
傳動和工作系統軟件需求和結構設計
- Software programming based on the machine functions developed
依據功能設計編寫實現軟件
- Software coding and implementation according to ECU specification
依據控制器進行軟件和硬件結合
- Carrying out the model-based software test (SIL, HIL)
基于模型的軟件和硬件在環測試
- Involvement in the application and vehicle tests
參與應用和車輛測試
Engineer Localization and Target Costing Support-Gearbox /..詳情
簡歷投遞： career.brcb@boschrexroth.com.cn
職位性質： 全職/見習 招聘人數： 2 人
工作地點： 北京
Engineer Localization and Target Costing Support-Gearbox /..職位描述：
- Experience in design engineering and project management
熟悉工程設計和項目管理
- Experience in 2D and 3D design tools (AutoCAD and Pro/Engineer)
熟悉2D和3D 的設計工具（AutoCAD 和 Pro/Engineer）
- Team work spirit
有團隊合作精神
- Design of single parts for gearboxes for mobile application according the local manufacturing requirements
根據本地生產要求，設計工程機械用的變速箱零件
- Manage the product transfer of gearboxes
管理變速箱產品由德國向國內生產轉移工作
- Technical support to other departments (purchasing and manufacturing) during localization process
國產化過程中，向其他部門提供技術支持，如采購和生產部門
- Technical collaboration with the lead plant in Germany in order to standardize locally development products
和德國主廠合作，在本地開發標準化的產品
- Collaboration within the improvement for general engineering processes
參與優化工程設計流程
Process Engineer / 工藝工程師詳情
簡歷投遞： career.brcb@boschrexroth.com.cn
職位性質： 全職/見習 招聘人數： 1 人
工作地點： 北京
Process Engineer / 工藝工程師職位描述：
- Bachelor or master degree and major in mechanics/ 機械設計制造相關專業，本科或研究生學歷；
- English level > = CET4, good spoken and written skills/ 英語CET4級以上，有較好的口語和書寫能力；
- Above 3 years career plan in Beijing/ 3年以上在北京就業的計劃；
- Good understanding and communication skills/ 有良好的理解和溝通能力；
- Willing to work in both workshop and office (Process engineers need to solve the problems or optimize the processes in the workshop, due to long process time of big part for wind energy, it sometimes takes a long time per day to work in the workshop)/ 愿意在辦公室和車間開展工作 （工藝工程師需要在車間解決問題或優化工藝，但因用于風力發電的工件較大，經常需要較長的在車間開展工作）；
- If with work experience, then at least 3 years on machining on iron casting parts and quality management/ 如果有工作經驗，那么至少是3年以上的鑄件加工及質量管理經驗；
- Students graduate from the university are also welcomed/ 應屆大學生和研究生也可挑戰此工作機遇。
- Process maintenance, optimization and development for iron casting parts for wind generator gearboxes/ 主要從事風力發電增速齒輪箱鑄件加工制造的相關工藝維護，優化與開發；
- Solving of quality and process problems in the workshop with a structural and systematic way/ 采用結構化和系統化的方法解決車間發生的質量問題和工藝問題；
- Creating and preparation of documents like work instruction, process control plan, inspection plan, P-FMEA for standardized operation, quality control and customer audit/ 起草、制作及準備用于指導標準化操作、質量控制以及客戶審核等相關的操作指導書、質量控制計劃、檢驗計劃以及P-FMEA；
- Project management and coordination for qualification of new products/ 新產品本地化生產的項目協調與管理；
- Contact lead plant in Germany for supports to solve problems in daily production/ 與德國主廠聯系，獲得支持以解決生產相關問題。
簡歷投遞： career.brcb@boschrexroth.com.cn
職位性質： 全職/見習 招聘人數： 1 人
工作地點： 北京
Hardware and measurement engineer / 硬件和測試工程師職位描述：
- University degree, mainly in the mechanical area, electronics or measurement engineering 大學以上學歷，機械，電子或測試技術工程專業
- Familiar with measurement technique and mechatronic systems 熟悉測試技術知識和機，電，液系統
- Experience in testing of the mobile working machines 有一定的移動機械測試經驗
- English in words and writing 英語說，寫能力
- Responsible for hardware (ECU, sensors, transducers and measurement equipments) specification 負責硬件（控制器，傳感器和測試儀器等）的需求管理
- Responsible for the measurement and data processing software 負責測試和數據處理所需軟件的管理
- Based on the test specification, design and realization of the measurement system configuration and calibration根據實驗要求設計和實現測試系統的配置和標定
- Design and match of the ECU interface and carrying out of the ECU test 控制器接口的設計匹配和測試
- Involvement in the creation of the test specification and support vehicle tests 參與制定測試要求并支持車輛測試，熟悉CAN Bus組件
System development engineer /系統開發工程師詳情
簡歷投遞： career.brcb@boschrexroth.com.cn
職位性質： 全職/見習 招聘人數： 2 人
工作地點： 北京
System development engineer /系統開發工程師職位描述：
- University degree above, mainly in the mechanic or electronic engineering / 大學以上學歷，機械或電子工程專業
- Familiar with control system design / 熟悉控制系統的設計方法
- Good knowledge about mechatronics and hydraulic systems / 具備機， 電， 液系統知識
- Experience in modelling and simulation of the mobile working machines / 有從事行走機械系統建模和仿真的經驗
- English in words and writing / 英語說，寫能力
- Modeling and simulation of the transmission and working systems / 行走系統和工作系統的建模和仿真
- Identify and prioritize system hazards / 系統風險的分析和優先級確定
- Development of the control strategy and design of the controller parameters/ 控制系統的控制策略和控制器參數設計
- Model-based design and test of the machine functions / 基于模型的系統功能設計和測試，熟悉Matlab/Simulink，和AMESIM軟件
- Involvement in the vehicle tests and parameter optimization/ 參與車輛測試和參數優化
Function&software engineer / 功能與軟件設計工程師詳情
簡歷投遞： career.brcb@boschrexroth.com.cn
職位性質： 全職/見習 招聘人數： 1 人
工作地點： 北京
Function&software engineer / 功能與軟件設計工程師職位描述：
- Bachelor’s degree or above, in mechanic, electronic or technical engineering
大學以上學歷，機械，電子，軟件工程專業
- Familiar with software engineering
熟悉工程軟件開發
- Knowledge in mechatronic systems
具備機，電，液系統知識
- Experience in programming with c, c++
有c, c++ 編程經驗
- Good English speaking and writing skills
英語說，寫能力
- Development of the software architecture and specification for mobile working and transmission system
傳動和工作系統軟件需求和結構設計
- Software programming based on the machine functions developed
依據功能設計編寫實現軟件
- Software coding and implementation according to ECU specification
依據控制器進行軟件和硬件結合
- Carrying out the model-based software test (SIL, HIL)
基于模型的軟件和硬件在環測試
- Involvement in the application and vehicle tests
參與應用和車輛測試
Engineer Localization and Target Costing Support-Gearbox /..詳情
簡歷投遞： career.brcb@boschrexroth.com.cn
職位性質： 全職/見習 招聘人數： 2 人
工作地點： 北京
Engineer Localization and Target Costing Support-Gearbox /..職位描述：
- Experience in design engineering and project management
熟悉工程設計和項目管理
- Experience in 2D and 3D design tools (AutoCAD and Pro/Engineer)
熟悉2D和3D 的設計工具（AutoCAD 和 Pro/Engineer）
- Team work spirit
有團隊合作精神
- Design of single parts for gearboxes for mobile application according the local manufacturing requirements
根據本地生產要求，設計工程機械用的變速箱零件
- Manage the product transfer of gearboxes
管理變速箱產品由德國向國內生產轉移工作
- Technical support to other departments (purchasing and manufacturing) during localization process
國產化過程中，向其他部門提供技術支持，如采購和生產部門
- Technical collaboration with the lead plant in Germany in order to standardize locally development products
和德國主廠合作，在本地開發標準化的產品
- Collaboration within the improvement for general engineering processes
參與優化工程設計流程
Process Engineer / 工藝工程師詳情
簡歷投遞： career.brcb@boschrexroth.com.cn
職位性質： 全職/見習 招聘人數： 1 人
工作地點： 北京
Process Engineer / 工藝工程師職位描述：
- Bachelor or master degree and major in mechanics/ 機械設計制造相關專業，本科或研究生學歷；
- English level > = CET4, good spoken and written skills/ 英語CET4級以上，有較好的口語和書寫能力；
- Above 3 years career plan in Beijing/ 3年以上在北京就業的計劃；
- Good understanding and communication skills/ 有良好的理解和溝通能力；
- Willing to work in both workshop and office (Process engineers need to solve the problems or optimize the processes in the workshop, due to long process time of big part for wind energy, it sometimes takes a long time per day to work in the workshop)/ 愿意在辦公室和車間開展工作 （工藝工程師需要在車間解決問題或優化工藝，但因用于風力發電的工件較大，經常需要較長的在車間開展工作）；
- If with work experience, then at least 3 years on machining on iron casting parts and quality management/ 如果有工作經驗，那么至少是3年以上的鑄件加工及質量管理經驗；
- Students graduate from the university are also welcomed/ 應屆大學生和研究生也可挑戰此工作機遇。
- Process maintenance, optimization and development for iron casting parts for wind generator gearboxes/ 主要從事風力發電增速齒輪箱鑄件加工制造的相關工藝維護，優化與開發；
- Solving of quality and process problems in the workshop with a structural and systematic way/ 采用結構化和系統化的方法解決車間發生的質量問題和工藝問題；
- Creating and preparation of documents like work instruction, process control plan, inspection plan, P-FMEA for standardized operation, quality control and customer audit/ 起草、制作及準備用于指導標準化操作、質量控制以及客戶審核等相關的操作指導書、質量控制計劃、檢驗計劃以及P-FMEA；
- Project management and coordination for qualification of new products/ 新產品本地化生產的項目協調與管理；
- Contact lead plant in Germany for supports to solve problems in daily production/ 與德國主廠聯系，獲得支持以解決生產相關問題。