從sql server中導入/導出 excel 的基本方法
/*=========== 導入/導出 excel 的基本方法 ===========*/
從excel文檔中,導入數據到sql數據庫中,很簡單,直接用下面的語句:
/*=============================================*/
--假如接受數據導入的表已存在
insert into 表 select * from
openrowset(microsoft.jet.oledb.4.0
,excel 5.0;hdr=yes;database=c:test.xls,sheet1$)
--假如導入數據并生成表
select * into 表 from
openrowset(microsoft.jet.oledb.4.0
,excel 5.0;hdr=yes;database=c:test.xls,sheet1$)
/*===========================================*/
--假如從sql數據庫中,導出數據到excel,假如excel文檔已存在,而且已按照要接收的數據創建好表頭,就能夠簡單的用:
insert into openrowset(microsoft.jet.oledb.4.0
,excel 5.0;hdr=yes;database=c:test.xls,sheet1$)
select * from 表
--假如excel文檔不存在,也能夠用bcp來導成類excel的文檔,注意大小寫:
--導出表的情況
exec master..xp_cmdshell bcp 數據庫名.dbo.表名 out "c:test.xls" /c -/s"服務器名" /u"用戶名" -p"密碼"
--導出查詢的情況
exec master..xp_cmdshell bcp "select au_fname, au_lname from pubs..authors order by au_lname" queryout "c:test.xls" /c -/s"服務器名" /u"用戶名" -p"密碼"
/*--說明:
c:test.xls 為導入/導出的excel文檔名.
sheet1$ 為excel文檔的工作表名,一般要加上$才能正常使用.
--*/
--上面已說過,用bcp導出的是類excel文檔,其實質為文本文檔,
--要導出真正的excel文檔.就用下面的方法
/*--數據導出excel
導出表中的數據到excel,包含字段名,文檔為真正的excel文檔
,假如文檔不存在,將自動創建文檔
,假如表不存在,將自動創建表
基于通用性考慮,僅支持導出標準數據類型
--鄒建 2003.10--*/
/*--調用示例
p_exporttb @tbname=地區資料,@path=c:,@fname=aa.xls
--*/
if exists (select * from dbo.sysobjects where id = object_id(n[dbo].[p_exporttb]) and objectproperty(id, nisprocedure) = 1)
drop procedure [dbo].[p_exporttb]
go
create proc p_exporttb
@tbname sysname, --要導出的表名
@path nvarchar(1000), --文檔存放目錄
@fname nvarchar(250)= --文檔名,默認為表名
as
declare @err int,@src nvarchar(255),@desc nvarchar(255),@out int
declare @obj int,@constr nvarchar(1000),@sql varchar(8000),@fdlist varchar(8000)
--參數檢測
if isnull(@fname,)= set @fname=@tbname+.xls
--檢查文檔是否已存在
if right(@path,1)<> set @path=@path+
create table #tb(a bit,b bit,c bit)
set @sql=@path+@fname
insert into #tb exec master..xp_fileexist @sql
--數據庫創建語句
set @sql=@path+@fname
if exists(select 1 from #tb where a=1)
set @constr=driver={microsoft excel driver (*.xls)};dsn=;readonly=false
+;create_db=" +;database=+@sql+"
--連接數據庫
exec @err=sp_oacreate adodb.connection,@obj out
if @err<>0 goto lberr
exec @err=sp_oamethod @obj,open,null,@constr
if @err<>0 goto lberr
/*--假如覆蓋已存在的表,就加上下面的語句
--創建之前先刪除表/假如存在的話
select @sql=drop table [+@tbname+]
exec @err=sp_oamethod @obj,execute,@out out,@sql
--*/
--創建表的sql
select @sql=,@fdlist=
select @fdlist=@fdlist+,[+a.name+]
,@sql=@sql+,[+a.name+]
+case when b.name in(char,nchar,varchar,nvarchar) then
text(+cast(case when a.length>255 then 255 else a.length end as varchar)+)
when b.name in(tynyint,int,bigint,tinyint) then int
when b.name in(smalldatetime,datetime) then datetime
when b.name in(money,smallmoney) then money
else b.name end
from syscolumns a left join systypes b on a.xtype=b.xusertype
where b.name not in(image,text,uniqueidentifier,sql_variant,ntext,varbinary,binary,timestamp)
and object_id(@tbname)=id
select @sql=create table [+@tbname
+](+substring(@sql,2,8000)+)
,@fdlist=substring(@fdlist,2,8000)
exec @err=sp_oamethod @obj,execute,@out out,@sql
if @err<>0 goto lberr
exec @err=sp_oadestroy @obj
--導入數據
set @sql=openrowset(microsoft.jet.oledb.4.0,excel 5.0;hdr=yes
;database=+@path+@fname+,[+@tbname+$])
exec(insert into +@sql+(+@fdlist+) select +@fdlist+ from +@tbname)
return
lberr:
exec sp_oageterrorinfo 0,@src out,@desc out
lbexit:
select cast(@err as varbinary(4)) as 錯誤號
,@src as 錯誤源,@desc as 錯誤描述
select @sql,@constr,@fdlist
go
--上面是導表的,下面是導查詢語句的.
/*--數據導出excel
導出查詢中的數據到excel,包含字段名,文檔為真正的excel文檔
,假如文檔不存在,將自動創建文檔
,假如表不存在,將自動創建表
基于通用性考慮,僅支持導出標準數據類型
--鄒建 2003.10--*/
/*--調用示例
p_exporttb @sqlstr=select * from 地區資料
,@path=c:,@fname=aa.xls,@sheetname=地區資料
--*/
if exists (select * from dbo.sysobjects where id = object_id(n[dbo].[p_exporttb]) and objectproperty(id, nisprocedure) = 1)
drop procedure [dbo].[p_exporttb]
go
create proc p_exporttb
@sqlstr varchar(8000), --查詢語句,假如查詢語句中使用了order by ,請加上top 100 percent
@path nvarchar(1000), --文檔存放目錄
@fname nvarchar(250), --文檔名
@sheetname varchar(250)= --要?jiǎng)?chuàng)建的工作表名,默認為文檔名
as
declare @err int,@src nvarchar(255),@desc nvarchar(255),@out int
declare @obj int,@constr nvarchar(1000),@sql varchar(8000),@fdlist varchar(8000)
--參數檢測
if isnull(@fname,)= set @fname=temp.xls
if isnull(@sheetname,)= set @sheetname=replace(@fname,.,#)
--檢查文檔是否已存在
if right(@path,1)<> set @path=@path+
create table #tb(a bit,b bit,c bit)
set @sql=@path+@fname
insert into #tb exec master..xp_fileexist @sql
--數據庫創建語句
set @sql=@path+@fname
if exists(select 1 from #tb where a=1)
set @constr=driver={microsoft excel driver (*.xls)};dsn=;readonly=false
+;create_db=" +;database=+@sql+"
--連接數據庫
exec @err=sp_oacreate adodb.connection,@obj out
if @err<>0 goto lberr
exec @err=sp_oamethod @obj,open,null,@constr
if @err<>0 goto lberr
--創建表的sql
declare @tbname sysname
set @tbname=##tmp_+convert(varchar(38),newid())
set @sql=select * into [+@tbname+] from(+@sqlstr+) a
exec(@sql)
select @sql=,@fdlist=
select @fdlist=@fdlist+,[+a.name+]
,@sql=@sql+,[+a.name+]
+case when b.name in(char,nchar,varchar,nvarchar) then
text(+cast(case when a.length>255 then 255 else a.length end as varchar)+)
when b.name in(tynyint,int,bigint,tinyint) then int
when b.name in(smalldatetime,datetime) then datetime
when b.name in(money,smallmoney) then money
else b.name end
from tempdb..syscolumns a left join tempdb..systypes b on a.xtype=b.xusertype
where b.name not in(image,text,uniqueidentifier,sql_variant,ntext,varbinary,binary,timestamp)
and a.id=(select id from tempdb..sysobjects where name=@tbname)
select @sql=create table [+@sheetname
+](+substring(@sql,2,8000)+)
,@fdlist=substring(@fdlist,2,8000)
exec @err=sp_oamethod @obj,execute,@out out,@sql
if @err<>0 goto lberr
exec @err=sp_oadestroy @obj
--導入數據
set @sql=openrowset(microsoft.jet.oledb.4.0,excel 5.0;hdr=yes
;database=+@path+@fname+,[+@sheetname+$])
exec(insert into +@sql+(+@fdlist+) select +@fdlist+ from [+@tbname+])
set @sql=drop table [+@tbname+]
exec(@sql)
return
lberr:
exec sp_oageterrorinfo 0,@src out,@desc out
lbexit:
select cast(@err as varbinary(4)) as 錯誤號
,@src as 錯誤源,@desc as 錯誤描述
select @sql,@constr,@fdlist
go
/*=========== 導入/導出 excel 的基本方法 ===========*/
從excel文檔中,導入數據到sql數據庫中,很簡單,直接用下面的語句:
/*=============================================*/
--假如接受數據導入的表已存在
insert into 表 select * from
openrowset(microsoft.jet.oledb.4.0
,excel 5.0;hdr=yes;database=c:test.xls,sheet1$)
--假如導入數據并生成表
select * into 表 from
openrowset(microsoft.jet.oledb.4.0
,excel 5.0;hdr=yes;database=c:test.xls,sheet1$)
/*===========================================*/
--假如從sql數據庫中,導出數據到excel,假如excel文檔已存在,而且已按照要接收的數據創建好表頭,就能夠簡單的用:
insert into openrowset(microsoft.jet.oledb.4.0
,excel 5.0;hdr=yes;database=c:test.xls,sheet1$)
select * from 表
--假如excel文檔不存在,也能夠用bcp來導成類excel的文檔,注意大小寫:
--導出表的情況
exec master..xp_cmdshell bcp 數據庫名.dbo.表名 out "c:test.xls" /c -/s"服務器名" /u"用戶名" -p"密碼"
--導出查詢的情況
exec master..xp_cmdshell bcp "select au_fname, au_lname from pubs..authors order by au_lname" queryout "c:test.xls" /c -/s"服務器名" /u"用戶名" -p"密碼"
/*--說明:
c:test.xls 為導入/導出的excel文檔名.
sheet1$ 為excel文檔的工作表名,一般要加上$才能正常使用.
--*/
--上面已說過,用bcp導出的是類excel文檔,其實質為文本文檔,
--要導出真正的excel文檔.就用下面的方法
/*--數據導出excel
導出表中的數據到excel,包含字段名,文檔為真正的excel文檔
,假如文檔不存在,將自動創建文檔
,假如表不存在,將自動創建表
基于通用性考慮,僅支持導出標準數據類型
--鄒建 2003.10--*/
/*--調用示例
p_exporttb @tbname=地區資料,@path=c:,@fname=aa.xls
--*/
if exists (select * from dbo.sysobjects where id = object_id(n[dbo].[p_exporttb]) and objectproperty(id, nisprocedure) = 1)
drop procedure [dbo].[p_exporttb]
go
create proc p_exporttb
@tbname sysname, --要導出的表名
@path nvarchar(1000), --文檔存放目錄
@fname nvarchar(250)= --文檔名,默認為表名
as
declare @err int,@src nvarchar(255),@desc nvarchar(255),@out int
declare @obj int,@constr nvarchar(1000),@sql varchar(8000),@fdlist varchar(8000)
--參數檢測
if isnull(@fname,)= set @fname=@tbname+.xls
--檢查文檔是否已存在
if right(@path,1)<> set @path=@path+
create table #tb(a bit,b bit,c bit)
set @sql=@path+@fname
insert into #tb exec master..xp_fileexist @sql
--數據庫創建語句
set @sql=@path+@fname
if exists(select 1 from #tb where a=1)
set @constr=driver={microsoft excel driver (*.xls)};dsn=;readonly=false
+;create_db=" +;database=+@sql+"
--連接數據庫
exec @err=sp_oacreate adodb.connection,@obj out
if @err<>0 goto lberr
exec @err=sp_oamethod @obj,open,null,@constr
if @err<>0 goto lberr
/*--假如覆蓋已存在的表,就加上下面的語句
--創建之前先刪除表/假如存在的話
select @sql=drop table [+@tbname+]
exec @err=sp_oamethod @obj,execute,@out out,@sql
--*/
--創建表的sql
select @sql=,@fdlist=
select @fdlist=@fdlist+,[+a.name+]
,@sql=@sql+,[+a.name+]
+case when b.name in(char,nchar,varchar,nvarchar) then
text(+cast(case when a.length>255 then 255 else a.length end as varchar)+)
when b.name in(tynyint,int,bigint,tinyint) then int
when b.name in(smalldatetime,datetime) then datetime
when b.name in(money,smallmoney) then money
else b.name end
from syscolumns a left join systypes b on a.xtype=b.xusertype
where b.name not in(image,text,uniqueidentifier,sql_variant,ntext,varbinary,binary,timestamp)
and object_id(@tbname)=id
select @sql=create table [+@tbname
+](+substring(@sql,2,8000)+)
,@fdlist=substring(@fdlist,2,8000)
exec @err=sp_oamethod @obj,execute,@out out,@sql
if @err<>0 goto lberr
exec @err=sp_oadestroy @obj
--導入數據
set @sql=openrowset(microsoft.jet.oledb.4.0,excel 5.0;hdr=yes
;database=+@path+@fname+,[+@tbname+$])
exec(insert into +@sql+(+@fdlist+) select +@fdlist+ from +@tbname)
return
lberr:
exec sp_oageterrorinfo 0,@src out,@desc out
lbexit:
select cast(@err as varbinary(4)) as 錯誤號
,@src as 錯誤源,@desc as 錯誤描述
select @sql,@constr,@fdlist
go
--上面是導表的,下面是導查詢語句的.
/*--數據導出excel
導出查詢中的數據到excel,包含字段名,文檔為真正的excel文檔
,假如文檔不存在,將自動創建文檔
,假如表不存在,將自動創建表
基于通用性考慮,僅支持導出標準數據類型
--鄒建 2003.10--*/
/*--調用示例
p_exporttb @sqlstr=select * from 地區資料
,@path=c:,@fname=aa.xls,@sheetname=地區資料
--*/
if exists (select * from dbo.sysobjects where id = object_id(n[dbo].[p_exporttb]) and objectproperty(id, nisprocedure) = 1)
drop procedure [dbo].[p_exporttb]
go
create proc p_exporttb
@sqlstr varchar(8000), --查詢語句,假如查詢語句中使用了order by ,請加上top 100 percent
@path nvarchar(1000), --文檔存放目錄
@fname nvarchar(250), --文檔名
@sheetname varchar(250)= --要?jiǎng)?chuàng)建的工作表名,默認為文檔名
as
declare @err int,@src nvarchar(255),@desc nvarchar(255),@out int
declare @obj int,@constr nvarchar(1000),@sql varchar(8000),@fdlist varchar(8000)
--參數檢測
if isnull(@fname,)= set @fname=temp.xls
if isnull(@sheetname,)= set @sheetname=replace(@fname,.,#)
--檢查文檔是否已存在
if right(@path,1)<> set @path=@path+
create table #tb(a bit,b bit,c bit)
set @sql=@path+@fname
insert into #tb exec master..xp_fileexist @sql
--數據庫創建語句
set @sql=@path+@fname
if exists(select 1 from #tb where a=1)
set @constr=driver={microsoft excel driver (*.xls)};dsn=;readonly=false
+;create_db=" +;database=+@sql+"
--連接數據庫
exec @err=sp_oacreate adodb.connection,@obj out
if @err<>0 goto lberr
exec @err=sp_oamethod @obj,open,null,@constr
if @err<>0 goto lberr
--創建表的sql
declare @tbname sysname
set @tbname=##tmp_+convert(varchar(38),newid())
set @sql=select * into [+@tbname+] from(+@sqlstr+) a
exec(@sql)
select @sql=,@fdlist=
select @fdlist=@fdlist+,[+a.name+]
,@sql=@sql+,[+a.name+]
+case when b.name in(char,nchar,varchar,nvarchar) then
text(+cast(case when a.length>255 then 255 else a.length end as varchar)+)
when b.name in(tynyint,int,bigint,tinyint) then int
when b.name in(smalldatetime,datetime) then datetime
when b.name in(money,smallmoney) then money
else b.name end
from tempdb..syscolumns a left join tempdb..systypes b on a.xtype=b.xusertype
where b.name not in(image,text,uniqueidentifier,sql_variant,ntext,varbinary,binary,timestamp)
and a.id=(select id from tempdb..sysobjects where name=@tbname)
select @sql=create table [+@sheetname
+](+substring(@sql,2,8000)+)
,@fdlist=substring(@fdlist,2,8000)
exec @err=sp_oamethod @obj,execute,@out out,@sql
if @err<>0 goto lberr
exec @err=sp_oadestroy @obj
--導入數據
set @sql=openrowset(microsoft.jet.oledb.4.0,excel 5.0;hdr=yes
;database=+@path+@fname+,[+@sheetname+$])
exec(insert into +@sql+(+@fdlist+) select +@fdlist+ from [+@tbname+])
set @sql=drop table [+@tbname+]
exec(@sql)
return
lberr:
exec sp_oageterrorinfo 0,@src out,@desc out
lbexit:
select cast(@err as varbinary(4)) as 錯誤號
,@src as 錯誤源,@desc as 錯誤描述
select @sql,@constr,@fdlist
go